Can mold always be remediated?

After all, mold is not a DIY solution. Instead, homeowners who want to remove mold from their homes and prevent further growth should partner with a mold remediation company. Even after professional mold removal, mold can reappear if the right conditions are met. It is impossible to remove all mold and mold spores indoors; some mold spores are floating in the air and in house dust.

Mold spores will not grow if there is no moisture. Indoor mold growth can and should be prevented or controlled by controlling indoor humidity. If there is mold growth in your home, you should clean the mold and fix the water problem. If you clean the mold, but don't fix the water problem, the mold problem will most likely come back.

However, mold deformations affecting limited areas, such as a very small growth in the bathroom tub or on a small section of drywall near a leaking faucet, can be easily treated. A mold cleaner can be used to thoroughly clean an affected area, along with grout and putty replacement. A small portion of drywall (about 10 square feet or less) with mold is also not considered serious. It can be isolated from the rest of the house and cleaned with a mold remover.

But always remember to watch for additional warning signs, as they can be anywhere in your home. Can Mold Come Back After Remediation? it is possible, but only if you stop looking for the resource of moisture, developing the problem of mold from the beginning. It is essential that you take care of your water source, whether it's a cracked pipe or a leaking window in your home. Once the problem is repaired, the mold removal process will prevent mold from returning to that location.

Paint and fungistatic coating are not the same. Fungistatic coatings, which is what the industry uses, have properties that prevent mold growth. The best coatings have a 10 year warranty. Normal paint is not fungistatic and paint has a number of organic compounds on which mold can and will grow.

If you see a coated surface, ask for documentation. We have repaired several access spaces and attics where the wood was white, mold was said to be remedied, but mold was found growing on the surface. Clearly, the white coating was not fungistatic. The key to preventing mold growth is to identify and control moisture and water problems.

Mold spores are everywhere, even in your home, and they can grow on any surface that has enough moisture. They were quick to give me a cost to remedy (read the expensive mold remediation), but said little about why mold was present. Mold sampling should be performed by professionals who have specific experience in designing mold sampling protocols, sampling methods and interpretation of results. Actually, there are many types of mold that like to feed on paint, also paint sticks to an organic surface (Sheetrock paper) that the mold likes.

The best way to find mold is to look for signs of mold growth, water spots, deformations, or follow the nose to the source of the odor. In short, there are mold remediation guidelines that you can review to understand the mold remediation process. Molds can be found anywhere and mold levels vary widely, depending on location, weather, and time of day. Some molds may appear white and threadlike (white molds look like spongy veins emerging from a central spore), others may be grayish brown, pink or grayish green.

If you decide to clean small areas of mold yourself, follow the safety guidelines for mold removal. Instead, homeowners who want to free their homes of mold, as well as stop further growth, should partner with a mold remediation company. It is feasible that mold will return after remediation, but only if you do not find the moisture resource that develops the mold problem. Many homeowners find themselves dealing with unwanted mold growth due to excessive moisture, wet wood, water intrusion and other circumstances that create the perfect “Petri dish” for mold spores to start growing and reproducing.

However, some people may choose to hire a New York State-licensed mold counselor to help identify mold problems and their cause. The first mold isn't regulated in every state except 11, so you can't normally hire a state-licensed mold company. . .

Chad Hobock
Chad Hobock

Devoted tea geek. Proud bacon enthusiast. Subtly charming twitter scholar. Infuriatingly humble internet advocate. Certified beer advocate.